MIMAKI SINGAPORE PTE. LTD.

Unusual nozzle test was printed

  • When you perform a TEST PRINT and see problems such as missing nozzles, deflections, or color mixtures, check the following:

【 Procedure 】
1. Clean the wiper, cap, head and surrounding area. It increases the success rate of the cleaning.
2. Perform the head cleaning (normal).
3. Perform the head cleaning (hard).
4. Perform NOZZLE WASH to wash off the ink stuck to the nozzle head.
5. Perform AIR PG (air purge). It is effective to resolve color mixtures or aerations.
6. Confirm the head height. If head height is too high, ink drops tend to turn into mist.
It causes nozzle deflection, nozzle missing or color mixture. For details, see
"How can the head height be adjusted."
7. Perform RECOVERY NOZZLE. For details, see "Tell me about Nozzle recovery."
8. Check that the installation environment conforms to the specification. For details,
 see "Printer installation environment."
9. If the above steps do not fix the problem, please contact us.

For details about each step, see "Operation Manual", "Request for Daily Care and Maintenance"


Return to Content

PAGETOP